# Use Our Free, Easy To Use, Online U Value Calculator Tool

## Our U Value calculator helps you to work out U Values which asses the rate of heat loss or gain through a building element such as a wall.

Article By: Tom Ayre
Last Update: August 2019

Are you looking to easily calculate U values for your building project? Our free to use online calculator will easily calculate your U Values in seconds.

Using our calculator will ensure you calculate U Values correctly and consistently. It will also save you a bit of time. Our calculator updates live so you can experiment with different values to the U Value figures you require.

Let’s get started.

### U-Values, What Are They?

A U Value is a number that illustrates the rate at which heat is transferred through a structure. The standard unit of measurement for this is W/m²K.

Broken down this means:

The rate of heat flow in watts directed over 1 x 1 metre square of a structure.

The lower the U-Value the more efficient the structure is, for instance, a U-Value of 0.5 will lose heat at double the rate of a 0.25 structure.

### What U-Values Should I Adhere To?

In The UK we recommend adhering to the regulations from the “Planning Portal – L1A: Conversation of fuel and power in new dwellings”

The document outlines some U-Value figures, these include:

Roof 0.20 W/m²K
Wall 0.30 W/m²K
Floor 0.25 W/m²K
Swimming Pool Basin 0.25 W/m²K
Windows & Doors 2.00 W/m²K

## U Value Calculator Guidance Notes

### Step 1 – Calculating Rsi Value and Rso Values

So what is Rsi and Rso?

Rsi is the surface resistance of the internal face of a roof, wall, floor etc.  Values of the Rsi are given from the Architects pocketbook as:

Roof / Ceiling 0.1
Wall 0.12
Floor 0.14

These figures are given in the units of m2k/w

Rso is the surface resistance of the external face, again, this could be a roof, wall, floor etc.

Values of the Rso are given by the Architects pocketbook as:

Roof / Ceiling 0.04
Wall 0.06
Floor 0.04

### Step 2 – Calculating R1,R2,R3.. Values

Calculating your material r value (thermal resistance) for a material is relatively simple. You need to look at how your building element is constructed and work out the r value for each element, see the diagram.

The first part is to work out your material thickness in millimetres (mm).

Once you have done this we need to look up the materials thermal conductivity which is expressed in m2K/W.

Typical building materials include values of:

Acoustic Tile 0.06
Brick 0.7
Concrete – cast dense 1.4
Concrete – cast light 0.4
Fiberglass 0.04
Glass (window) 0.8
Hardwoods (oak) 0.16
Particle board (high density) 0.17
Particle board (low density) 0.08
Softwoods (pine) 0.12

### Step 2 – Adding Airspace Resistance (Optional)

If you have a cavity wall or air gap in your construction element then this needs to be accounted for in your U Value calculation. For the air gap calculation, for simplicity, we don’t include a thickness element

The thermal resistance of an air gap in a cavity wall can be simplified to 0.18 m2K/W.

For a roof space above an insulated ceiling the value can be taken as 0.04 m2 K/W

## Guide – What is a Topographical Survey?

What is a Topographical Survey? A Beginner's Guide to What, Why & How We help you understand [...]

## Guide – Measured Survey Drawing Types

Measured Survey Drawing Types We explain some of the types of measured survey drawings available Article [...]

By |October 25th, 2018|Useful Guides|0 Comments

This site uses Akismet to reduce spam. Learn how your comment data is processed.